Electromagnetic Compatibility(EMC)
New EMC Measurement Software
Latest EMC measurement software “EPX/RE” leading the Accelerated Time Domain Scan feature a success The “EPX/RE”, completely new radiated emission measurement and evaluation software enables highly reliable EMI measurement without missing any noise, which is achieved by embedding in its auto measurement sequence the Accelerated TDS feature, an optional feature for Keysight Technologies’ N9048B PXE EMI receiver. The measured noise data are also quite effective for taking countermeasures against noise as you can analyze the behavior of noise in relation to frequency but also in time sequence.
Features and Benefits
- Highly reliable automatic measurement sequence with Accelerated Time Domain Scan feature embedded
- Super reliable measurement sequence giving higher priority to in-band gap-less measurement
- Accelerated Time Domain Scan step measurement sequence giving higher priority to the reduction in measurement time
- Pre-scan with QP detector
- Noise analysis is possible after removing impulse (PK/Maxhold) that hides noise in a wide range
- Automatically set the appropriate Dwell Time based on the analysis of noise
- Evaluation of chronological noise data
- Report feature customizable by userscc
- Accelerate time-to-market
Having a feature of monitoring noise at all frequencies in the FFT band at all times, the Accelerated TDS feature has a much wider FFT band than before, namely 350MHz. If you use this feature, gapless measurement can be conducted in only 3 ranges in a band of 30 to 1000MHz. Scan can be performed at the same speed as the sweep method while the monitor time for each frequency will be much longer. As an FFT band of 350MHz is maintained for QP measurement, pre-scan measurement is possible using QP detector. The menu and parameters on GUI have been designed based on our own EP9 software, which has long been well received in the market. So, both the existing users as well as new users of EMI software can easily operate the EPX/RE.
Anyone can conduct accurate measurement without missing any noise automatically and easily on the “EPX/RE,” which makes the best use of the Accelerated TDS feature and embeds it into the measurement sequence. The measurement results you will get on the “EPX/RE” have the same accuracy as those obtained by the experienced EMC engineer. Necessary noise spectrum may be hidden when not-to-be-measured impulse such as static electricity or click is entered because the Accelerated Time Domain Scan feature offers gap-less measurement. The “EPX/RE” is capable of separating such impulse based on the frequency of occurrence of such noise and removing unnecessary spectrum. With this feature, only noise to be measured is displayed, which makes the analysis easier.
The “EPX/RE” is the best solution for those who would like to address issues with noise measurement including intermittently seen noise that cannot easily be reproduced.
TOYO Corporation is committed to contribute to the product development and development of the industries by solving issues with noise measurement all engineers have by providing the “EPX/ER” and future EPX series software.
Requirements
OS: Windows 10 Professional 64bit
CPU: 1.5GHz or higher (Core i7 or higher
recommended)
Memory: 16GB or higher recommended
Storage: 512GB SSD for system drive (minimum
requirement); additional 2TB HDD for data
storage (recommended)
Display: 1920 x 1080px or better
Driver: National Instruments VISA
Others: Microsoft Office 2019